Functions and Uses of DC Gear Motors

Dc gear motor

At Szdsmotor, the DC Geared Motors are made from quality raw material. These are most sought after by clients for their superior quality which can withstand varied temperature and pressure conditions. These motors are having in variants such as variety of supply voltage, speeds, ratios & mounting options. These are used in various automation machines & commercial equipments suiting needs of domestic & international markets. Please consult with us about these or any other conditions of use that may apply, so that we can be sure that you select the most appropriate model. Find us more at


There can be long term storage of geared motor in an environment where material can generate corrosive gas, toxic gas, etc. It requires a temperature where it is expressively high or low of much humidity. We should be especially careful with regard to storage. DC Gear  motors are affected by load conditions, the mode of operation, the environment of use, etc. One can well mark the adhesive applying of installing geared motor on output shaft. It is necessary that the adhesive do not spread along the shaft. Again, silicon adhesive or other volatile adhesive, harmfully affects the themotor's interior. In addition, avoid press fitting, as it could deform or damage the motor's internal mechanism.


A DC motor is a class of electrical machine that converts direct current electrical power into mechanical power. The most common one relies on the forces. This is of vital importance these days for industries. A simple DC motor has a stationary set of magnets with one or more windings insulated wire wrapped around a soft iron core that concentrates the magnetic field. The windings usually have multiple turns and in large motors there can be several parallel current paths where the ends are connected to commurator. Then the commurator allows the armature coil to be energized in turn and connects the rotating coils with external power supply through brushes. In some DC motor designs the stator fields use electromagnets to create their magnetic fields which allow greater control over the motor.


There are some necessary consults before using the motor gear.

Please consult with us should any of them apply.

-Use with a load that exceeds the rated torque

- Momentary reversals of turning direction

-Use in which the permitted overhang load or the permitted thrust load is exceeded.

-A pulse drive, e.g., a short break, counter electromotive force, PWM Control

-Use of a voltage that is nonstandard as regards the rated voltage

-Use outside the prescribed temperature or relative-humidity range, or in a special environment


Compact, and yet extremely powerful, are the units of the 300 planetary gear motor series. The train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the finely spaced frame sizes, spanning over the torque range. Two of the most common types of gear motors are the DC planetary gear motor and the spur gear motor. If you're unfamiliar with these two types of motors, it can be compact, and yet extremely powerful, are the units of the 300 planetary gear motor series. They come in variety of power levels, sizes, and will be sure to fit your Brush DC Planetary Gear motor requirements. These motors are fully reversible now with different position, name, price, newest, amperage, ratio, and assembled of teeth.