Although there is no safety risk in theory when the rope saw is used, we should pay more attention to our own safety. Before starting work, we'd better check it first, and then simply understand what to check:       1. Before commencement, the performance of cutting equipment must be carefully checked to ensure the integrity of all mechanical components       2. The power knife switch, saw blade tightness, saw blade shield, safety baffle, etc. all need to be carefully checked by the construction personnel. The operating platform needs to be stable. The night work should have enough lighting brightness. Remember not to work in an environment with unclear light       3. Before the commencement, the construction personnel can turn on the main switch and conduct no-load test run for several cycles, and start the work after confirming that it is safe       The above is some inspection work that needs to be done before the rope sawing machine starts. I hope you can remember that if there are any problems, please call at any time